Product No.: On request
The pump is of the canned rotor type, i.e. pump
and motor form an integral unit without shaft
seal and with only two gaskets for sealing.
The bearings are lubricatd by the pumped liquid.
The pump has 3-step speed selector.
The pump is characterized by:
* Ceramic shaft and radial bearings.
* Carbon axial bearing.
* Stainless steel rotor can and bearing plate.
* Corrosion-resistant impeller, Composite.
* Cast iron pump housing.
The motor is a 1-phase motor.
No additional motor protection is required.
Liquid:
Pumped liquid: Water
Liquid temperature range: 2 .. 110 °C
Selected liquid temperature: 60 °C
Density: 983.2 kg/m3
Technical:
Rated flow: 2.02 m3/h
Rated head: 3.34 m
TF class: 95
Materials:
Pump housing: Cast iron
EN 1561 EN-GJL-150
ASTM 30 B
Impeller: Composite
PES+30% GF
Installation:
Range of ambient temperature: 0 .. 40 °C
Maximum operating pressure: 10 bar
Type of connection: G
Size of connection: 1 1/2 inch
Pressure rating for connection: PN 10
Port-to-port length: 180 mm
Electrical data:
Power input in speed 1: 35 W
Power input in speed 2: 65 W
Max. power input: 115 W
Mains frequency: 60 Hz
Rated voltage: 1 x 220 V
Current in speed 1: 0.17 A
Current in speed 2: 0.3 A
Current in speed 3: 0.51 A
Capacitor size – run: 2.5 μF
Enclosure class (IEC 34-5): IP44
Insulation class (IEC 85): F
Built-in motor protection: NONE
Others:
Terminal box position: 9HNet weight: 2.51 kg
Gross weight: 2.65 kg
Shipping volume: 0.004 m3
