Note! Product picture may differ from actual product
Product No.: On request
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe
handling, and easy access and service. Power transmission is via a rigid split coupling.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product details
Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic electro-deposition
(CED) process.
CED is a high-quality dip-painting process where an electrical field around the products ensures deposition of paint
particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment.
The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means
of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2″ priming plug and vent screw.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.
Seal faces:
Qty. Description
1 Primary shaft seal: HQBE
Code for shaft seal: HQBE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS
Curve tolerance: ISO9906:2012 3B
Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC
Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 10 bar
Max pressure at stated temp: 10 bar / 120 °C
10 bar / 0 °C
Type of connection: Oval / Rp
Size of inlet connection: 2 inch
Size of outlet connection: 2 inch
Pressure rating for connection: PN 10
Flange size for motor: FF265
Electrical data:
Motor standard: IEC
Motor type: 132SB
Rated power – P2: 7.5 kW
Power (P2) required by pump: 7.5 kW
Mains frequency: 60 Hz
Rated voltage: 3 x 220-277D/380-480Y V
Rated current: 24,6-20,8/14,2-12,0 A
Starting current: 680-1050 %
Cos phi – power factor: 0.90-0.82
Rated speed: 3490-3530 rpm
IE Efficiency class: NEMA Premium / IE3 60Hz
Motor efficiency at full load: 90.2 %
Motor efficiency at 3/4 load: 90.9-90.7 %
Motor efficiency at 1/2 load: 91.4-89.7 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 85U07522
Controls:
Frequency converter: None
Others:
Terminal box position: 6
Minimum efficiency index, MEI ≥: 0.70
Net weight: 99 kg
Gross weight: 121 kg
Shipping volume: 0.285 m³
Country of origin: HU
Custom tariff no.: 841381200000
Description Value
General information:
Product name: CR 15-5 A-A-A-E-HQBE
Product No: On request
EAN number: On request
Technical:
Pump speed on which pump data are
based:
3525 rpm
Rated flow: 20.5 m³/h
Rated head: 81.1 m
Maximum head: 102 m
Stages: 5
Impellers: 5
Number of reduced-diameter impellers: 0
Low NPSH: N
Pump orientation: Vertical
Shaft seal arrangement: Single
Primary shaft seal: HQBE
Code for shaft seal: HQBE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS
Curve tolerance: ISO9906:2012 3B
Pump version: A
Model: A
Materials:
Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Material code: A
Code for rubber: E
Bearing: SIC
Installation:
Maximum ambient temperature: 60 °C
Maximum operating pressure: 10 bar
Max pressure at stated temp: 10 bar / 120 °C
10 bar / 0 °C
Type of connection: Oval / Rp
Size of inlet connection: 2 inch
Size of outlet connection: 2 inch
Pressure rating for connection: PN 10
Flange size for motor: FF265
Connect code: A
Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 °C
Selected liquid temperature: 60 °C
Density: 983.2 kg/m³
Electrical data:
Motor standard: IEC
Motor type: 132SB
Rated power – P2: 7.5 kW
Power (P2) required by pump: 7.5 kW
Mains frequency: 60 Hz
Rated voltage: 3 x 220-277D/380-480Y
V
Rated current: 24,6-20,8/14,2-12,0 A
